As a waterfowling kayak, the phantom is purpose-built to overcome the challenges often found when hunting out of smooth bottomed conventional kayaks.  Due to the catamaran style hull, this platform is extremely stable to support the additional weight of hunting gear and the extreme lateral movements that accompany hunting from a kayak, such as shooting your gun or tossing decoys.

Dimensions:
Overall:  9' L x 32" W x 13" D
Cockpit:  6' 3"  L x 29" W x 9" D
Weight:  55 LBS / Weight Cap: 360 LBS

The Final Attack is arguably the most versatile sneak boat you will ever own.  With an ultra-low profile, this boat flattens out  in extremely short vegetation and has ample room for both you and your gear.  With a built-in transom, you can easily attach a motor for an effortless trip to your destination.  And with built-in low profile wheels, the Final Attack is also a cinch to move across dry land, and makes an excellent pit blind or portable field blind.

Dimensions:
Overall:  8' L x 44" W x 14" D
Cockpit:  4' 10"  L x 26" W x 13" D
Weight:  75 LBS / Weight Cap: 420 LBS
Item : #0824 - Marsh Brown

Beavertail delivers premium-quality boats while setting the standard for propulsion with its rugged long-shaft motors and advanced surface-drive outboards.   

• All welded, durable 100 gauge aluminum hull, stern, & sidewalls
• Two, 10 Ft. water-resistant gun boxes for stowing extra gear
• Drop floor in stern for securing batteries &  fuel tank
• Flat diamond plate floors & forward deck for an ultra-stable system
• Heavy-duty rub rail sidewall cap
• Exclusive forward tapered front deck to run water out the bow
• Patent pending Performance Flotation Pods
• Built-in interior tubing for accessory wiring
• Foam filled floor, front deck, & pods for extra flotation & load offset
• 24" sidewalls
• Front and rear exterior grab handles
• Interior mounted Heavy-duty tie-down loops
• HD olive-drab paint for a non-reflective wear resistant finish

LONG SHAFT MOTORS

Beavertail Long-Shaft Motors go where others can't. These guide-quality backwater motors let you penetrate shallow hideaways and chew your way over mud flats in pursuit of the best hunting and fishing locations. Exclusive Uni-Seamless frame construction for die-hard durability – each hardened steel frame is laser-cut, CNC-milled and robotically welded for unfailing alignment precision. The nickel-plated drive shafts are polished, ground and balanced for smooth, low-vibration operation. Patent-pending, removable stainless steel bearing assemblies. Upper and lower stainless steel removable caps and housings. Super-weedless, heavy-cupped stainless steel Performance Series X props. All are sealed with a corrosion-resistant zinc undercoat and a powder-coated finish. Rubber-mounted adjustment bolts for manual trim.

Available in:  6hp Kohler, 13hp Honda, 20hp Kohler, 24hp Honda, 27hp Kohler, and 35hp Vanguard

SURFACE DRIVE MOTORS

Beavertail Surface-Drive Motors are built with a no-compromises, no-excuses approach for premium performance, and perfected with countless hours on the water for outstanding quality.  These next-generation motors deliver extraordinary muck-pushing power with the most advanced surface-drive system on the market. Geometrically reinforced aircraft-grade aluminum frames and drive housings minimize weight and increase durability. Thrust-optimized stainless steel two-bladed props. Powered trim and tilt lifts the motor above the trailer plane. Super-reliable synchronous belt drives. Hassle-free electric clutches. Polished and balanced electroless plated drive shafts. Primed with a zinc-rich undercoat and with a flat marine powder-coated finish.

BOAT BLINDS

Beavertail Boat Blinds are the original "flip-over blinds" and have numerous exclusive features that truly set us apart.  The only gunnel to gunnel clearance frame in the industry, our blinds have large vegetation pockets (not loops), closeable shooting holes and easily attach to your boat without drilling holes.  These blinds have the features and quality you expect and demand.

• 1600 Series - Fits boats 15'- 17' long.  Top Beam 60" - 72"
• 1800 Series - Fits boats 17'- 20' long.  Top Beam 72" - 86"
• 2200 Series - Fits boats 19'- 23' long.  Top Beam 86" - 96"
  
  Features:
  
• 3 to 5 closeable shooting holes (depending on model).
• The only gunnel to gunnel clearance frame in the industry.
• Attaches to your boat using the exclusive adjustable telescoping frame system, so no holes have to be drilled into your boat.
• Allows you to use your bench seats, gun boxes & storage without interference of the blind frame.
• Constructed of marine grade aluminum, stainless steel, and galvanized tubing.
• Exclusively made to run with a mud motor; equally effective with outboards.
• Weighs approx. 47 pounds and stands 27" above gunnels.
• Acommodates square front jon boats as well as semi-V front jons.
• 600 Denier Cordura stitched with nylon thread.
• Only blind in the industry with vegetation pockets, not loops.  The pocket is capable of handling large quantities of foliage.
• Fits all Xpress, War Eagle, Polar Kraft, Alumicraft, Sea Ark, Grizzly Tracker, Lowe,  Crestliner, Legend Craft, Gator Trax, Go-Devil, Curacraft, Rino, Triton, & many more boat models.  We are the only flip blind in the world that can say we have our blinds on every one of these boats.
• By exchanging the blind arms for ground legs, this is the only blind in the industry that can go from the boat to the field in 5 minutes.

The Avery Quick-Set Boat Blind Lightweight and fully collapsible, the Quick-Set Blind is constructed of adjustable square aluminum tubing allowing it to "slide-adjust" to fit boats from 14' to 19' in length and up to 84" beam width. The Quick-Set can be set up and lowered in just seconds, and it rests within the gunwales of your boat when not in use. All tools needed for mounting to your aluminum or fiberglass boat are included. Interior WindBlockers of heavy duty urethane coated nylon and exclusive LeafyCut CamoSkirts make for a "deadly" 3-D camo system.

Available Camo Patterns:  Mossy Oak Shadow Grass, Natural Gear, Killer Weed

Sizing Chart:
* 14/16 Model - Fits boats from 14' to 16' long
with maximum beam widths of 68"

* 17/19 Model - Fits boats from 17' to 19' long
with maximum beam widths of 84"